IndustRFID Industrial RFID Reader:

• Embedded Web interface for configuration and monitoring (future 25Mar08)
  
• Telnet Connectivity for realtime data (future 25Mar08)
• RS232, RS485, Modbus, Bitbus, Profibus, DH-485, P-Net interfaces for realtime data
• Barcode Emulation: unformatted ASCII output for PLC interfaces (future 25Mar08)
• Industrial I/O Standard Features:
• Read Tag on Trigger, set Good or Bad Output
• Write Tag on Trigger, set Good or Bad Output
• Constant Data
• Incrementing/Decrementing Data
• Randomized Data (future 25Mar08)
• Read Tag on Trigger, set Outputs based on Tag Data (future 25Mar08)
• Extract User Data from passing tags and send to host (future 25Mar08)
• All of the above, based on scan for tags instead of input trigger (future 25Mar08)
• All of the above, with network notification (future 25Mar08)
• All of the above, with serial PLC notification (future 25Mar08)
• More complex interactions between I/O, Network and RFID are programmable by Python
• GlueLogix can do special programming on this platform
  
• Low level data passthrough to integral reader
• NEMA enclosure
• Light Stack for instant local feedback
  

Technical Features

• Uses UHF OEM modules from ThingMagic and WJ,  and HF from Feig, letting you:
  
• Select the best radio for your application
• Keep the same network and realtime interfaces
  
• Gumstix for network communications and high level applications
• Socketed for repair and updates
• Scenix SX48 with 50 MHz clock for serial communications and realtime functions
  
• Sockets for 6 Grayhill Industrial I/O Modules, selectable for AC or DC interfacing
• Extra I/O and wiring points for custom applications
  

Status 25Mar2008

• Developing Barcode data input for ePedigree and similar applications.
• First Feig HF system for ISO15693 delivered in 2007.  See the HF Antennas page.
  
• LineLogix system with IndustRFID+ThingMagic and flexible antenna assembly serializing UHF inlays on 3 inch labels at 25 FPM.  Antenna was hand optimized for application.  LineLogix system displaced a Confidex reader due to Linelogix' superior performance and selectivity.  Three such systems delivered in 2007
  
• 03Nov06: Delivered First LabelLogix system, powered by IndustRFID+ThingMagic.  System serializes on-pitch AD-220 at 100/minute.
  
• Working with ThingMagic M4e on serial connection to LineLogixPC and RFIDiagnostixPC.
• Working with LineLogix test system.
  
• Reading and writing tag IDs, not working with user data yet.
• Features marked "future" above are planned or partially implemented, but not working yet.
• Prerelease units are available.  Preliminary spec sheet