Table HF RFID Tag Shooter TCU Board GlueLogo





  sidebar



  RFID

  FEIG RFID

  Consulting
  Publications

  About GlueLogix

 Contact:

 Larry@GlueLogix.com

 USA 919.342.0201

 GlueLogix is a registered
  trademark of GlueLogix, Inc.

  LineLogix is protected
  by US Patents 8,896,425 and 11,429,829




RFIDiagnostix Handheld Software

What do people really need in an RFID handheld?  Most of the industry needs exactly what's available - a no-brainer interface that feeds tag data into the facility's data collection system.  But some of us need more, and could use much more.  Enter GlueLogix.

GlueLogix is developing RFIDiagnostix, software that turns any handheld RFID terminal into a mobile tag health tester.  With RFIDiagnostix, you will be able to quantify that tags and labels are good when they are delivered to you, and see how they stand up to printing and application.  You can also test tags at different positions on your cases & pallets to identify "dead spots" where you should not apply tags.

These screen shots are for an early version of RFIDiagnostix, that performs a power-modulation sweep using the SAMSys MP9311:

tab1
tab2



Specifications

Platform
This software should run on any RFID handheld based on WinCE or PocketPC and .Net Compact Framework 2.0 or 1.x, and can be ported to other operating systems.
Tested Platforms
IPAQ running WinCE and .NetCF 1.x
Operating Systems
WinCE, .NetCF2.0 preferred (more features available vs. CF 1.x)
Embedded Linux on request.
Readers and Tests
See below.

Readers and Tests

Reader (UHF)
Test
Sweep Parameters
SAMSys
Read, Write
Power, Modulation Depth, Frequency
ThingMagic
Read, Write Power, Frequency
WJ
Read, Write Power

Other reader types and frequency ranges available on request.

Status 31May06

  • Reading and writing tags, with power/modulation sweep, SAMSys MP931x, WinCE on IPAQ with .Net Compact Framework 1.x.
  • Projected availability with ThingMagic and WJ: August 2006
  • RFIDiagnostixPC is available NOW for SAMSys MP93xx, WJ MPRx000 and ThingMagic M4e: RFIDiagnostixPC Page
  • Ballpark Price: $500 software-only (price break for extra licenses), $2500 for PCMCIA Industrial PDA with WJ MPR5000 and software
  • Advance Sales speed development and give you a chance to request features: Inquire by email



If you already sell a handheld, GlueLogix can help you port new readers and features into your existing software. 



Copyright (c) 2023, GlueLogix Inc. All rights reserved.